When you attach the board for the first time via the MicroUSB connector, your PC will try to install a driver. If this does not work automatically download and install the driver here. The ArduinoTM IDE provides the simplest way of programming the development board. Download the IDE from www.Arduino.cc. When you start the software, you first have to choose the correct port and board. For the latter, you select the Arduino NanoTM (ATmega328 processor). ...
Description Command Basics Test Command AT Reset AT+RST Firmware Infos AT+GMR Echo On/Off ATE<1/0> WiFi Commands WiFi-Modus (1 = Client, 2 = AP, 3 = Dual) AT+CWMODE= Search WiFi network AT+CWLAP Connect to Wifi AT+CWJAP=““,““ Disconnect WiFi AT+CWQAP Settings WiFi -AccesPoint AT+CWSAP=““,““[,,] Show IP AT+CIFSR activate/deactivate DHCP AT+CWDHCP=<1/0> Auto connect to WiFi AT+CWAUTOCONN=<1/0> Change MAC address of AP AT+CIPSTAMAC= Set IP address of station AT+CIPSTA= Set IP address of AccesPoint AT+CIPAP= Start SmartConfig AT+CWSTARTSMART= Stop SmartConfig AT+CWSTOPSMART Communication Ping AT+PING= Accept multiple connections AT+CIPMUX= Set transfer mode (0=normal, 1= unvarnished transmission mode, only for TCP single connection) AT+CIPMODE= Structure of received data +IPD,,: Start connection AT+CIPSTART=““,““, Send data AT+CIPSEND=, Close connection AT+CIPCLOSE= Server Commands Start TCP server AT+CIPSERVER=1, Stop TCP server AT+CIPSERVER=0 Server status & connected clients AT+CIPSTATUS Set server timeout AT+CIPSTO= Show connected clients AT+CWLIF
The Pretzelboard (NanoESP) needs a driver for the USB-to-Serial Chip CH340G to work properly. You can download the driver here: Windows (Windows 98 - Windows 10, 32-Bit/64-Bit) Linux Version Mac Version (Attention: There seems to be a problem with MAC OS Sierra. Bellow are two links with walkthroughs: https://github.com/jimaobian/CH34x_Install_V1.3/blob/master/CH34x_Install_V1.3.zip https://github.com/adrianmihalko/ch340g-ch34g-ch34x-mac-os-x-driver ) Android Version There is a Setup.exe file (Windows Version) in the Zip-Folder which needs to be executed. Choose Install in the following Window. ...